SGS Certification for Lifting Equipment in Accordance with Latest Canadian Standards

In 2008, SGS was appointed to evaluate the safety of lifting operations in a major copper foundry in Montreal. SGS performed a thorough inspection of every overhead crane in the foundry and certificated the machinery in accordance with latest Canadian standards.

Although overhead cranes and rigging hardware are often regarded as safe to operate, accidents happen. In Quebec, Canada alone, more than 600 lifting operations incidents at industrial and manufacturing facilities are reported yearly to the Occupational Health and Safety Commission.

Such incidents are mostly caused due to the insufficient training and experience in the operation of cranes and the use of worn, inappropriate or damaged equipment. Furthermore, improper rigging practices, poor maintenance, lack of inspection procedures and operator errors can lead to the serious injury or death of workers and others involved.

In the province of Quebec, regulations on inspection and operations underwent changes in 2008. A new act concerning occupational health and safety (current version: July 15, 2008 and May 16, 2009) was announced, requiring that an overhead traveling crane must be operated exclusively by an operator who has received theoretical and practical training from an instructor.

In addition to this, the Canadian Standard Association revised the B167 standard to include a new section on safe operation. The current edition is the third edition published on October 1, 2008: CSA B167-08, Overhead Traveling Cranes - Design, Inspection, Testing, Maintenance and Safe Operation.

In 2008, SGS was awarded a contract to evaluate the safety of lifting operations in a major copper foundry in Montreal in accordance with these new regulations. SGS first performed a thorough inspection of every overhead crane in the foundry, including Non-Destructive Testing (NDT) inspection on critical elements. This was followed by proof testing on all rigging hardware which included chain falls, chain slings, wire rope slings and blocks.

The assessment procedure was concluded with the Visual Inspection (http://www.sgs.com/visual-inspection-services.htm) of synthetic slings and small hardware.

In addition to machinery certification, SGS provides training for crane operators and inspectors in accordance with the most up-to-date Canadian standards as well as all applicable international standards. In Montreal, over 300 operators have already received training on how to operate cranes safely.

As industrial inspection procedures directly affect safety, you can develop the best suitable conformity assessment procedure for your equipment and your target markets using the worldwide network of SGS Industrial Services for Product Certification (http://www.sgs.com/product-certification-2.htm).

The SGS Group is the global leader and innovator in inspection, verification, testing and certification services. Founded in 1878, SGS is recognized as the global benchmark in quality and integrity. With more than 56,000 employees, SGS operates a network of over 1,000 offices and laboratories around the world.

SGS Industrial Services
Gerard Landry, Eng.
Director of Sales – Quebec

SGS Canada Inc.
3420, St. Joseph Blvd East
Montreal (Quebec) Canada
H1X 1W6

t: +514 255 1679 ext:362
f: +514 252 0071

Email: industrial.pr@sgs.com
Website: www.sgs.com/industrial

This release was published on openPR.