Differential Pressure Sensor from AST for Liquids and Gases

American Sensor Technologies, Inc. (AST) now offers the AST5400 wet / wet differential pressure sensor (also termed differential pressure transducer or transmitter) to measure line pressures up to 2,000 PSI with a turndown ratio of 15 to 1. This cost effective product was developed to bring the features of differential pressure sensors to the process industry market.

Using Krystal Bond™ Technology, the AST5400 contains no silicone oil, O-rings, or welds. This MEMS pressure sensor technology completely isolates the media to the pressure ports, thus eliminating contamination risk. The low strain level on the diaphragm results in accurate, repeatable measurements. This differential pressure sensor, with its high line pressure capability, can be installed into systems without five way equalization valves, thus saving users hundreds of dollars per installation.

The AST5400 replaces systems that use two gauge pressure sensors to calculate differential pressure, saving on installation time, and lowering cost. Because the accuracy or in-accuracy, of two sensor systems is additive, the AST5400 can easily increase performance over temperature.

With the advancements in electronics, users of differential pressure switches can now make use of a sensor to monitor system performance and trends in applications requiring a high turn-down and high cycle performance. Alarm functions can be added through most controllers, thus obsoleting the switch.

The AST5400 differential pressure sensor can be used to measure differential pressure across a filter, monitor level in a sealed or vented tank, or calculate flow across an orifice plate. With digital compensation, the AST5400 series offers excellent linearity and performance over temperature. The electronics offer a fail safe condition on the output signal. If the transducer were to experience a fault condition, the transducer can be programmed to rail the output signal to 10% below the minimum or 10% above maximum output signal to notify the user of an issue and protect the system from undesirable conditions. The AST5400 also offers excellent flexibility, allowing for a variety of wetted materials and pressure ports.

For more information on AST and the AST5400 differential pressure sensor, visit our website: http://www.astsensors.com/index.php

For higher line pressure ratings, contact AST.

About AST
American Sensor Technologies, Inc. (AST) manufactures MEMS-based pressure sensors, pressure transducers and pressure transmitters that offer the best price-performance ratio in the industry. Manufactured in New Jersey, AST pressure sensing products are built with a full selection of hazardous area and industrial approvals to service customer applications. Common industries utilizing AST sensor products are industrial OEM hydraulic systems, fuel cells, medical gases, HVAC, refrigeration (ammonia, Freon, CO2), Oil & Gas exploration and production, and off-road vehicles. AST’s exclusive, proprietary Krystal Bond™ Technology (an advanced process in which inorganic materials are molecularly diffused onto a metallic surface in the presence of certain gases), produces high-performance pressure sensing products through the use of a single piece of stainless steel. AST offers a variety of UL and CSA approvals for Explosion-proof, Intrinsically Safe, and Non-incendive pressure transmitter applications. For more information on AST pressure sensing products and technology, please visit www.astsensors.com. Through the acquisition of noted LVDT manufacturer Macro Sensors (www.macrosensors.com), AST also offers a full line of linear/rotary position sensors, as well as related instrumentation.

45 Clark Drive
Mt. Olive,NJ 07828

This release was published on openPR.