Press release
Schaltbau GmbH sponsors electric car of Bochum University of Applied Sciences
The C163 series contactor is capable of handling voltages of over 100 volts and currents of up to 100 amperes.
The contactor is robustly built to handle voltages of over 100 volts and currents of up to 100 amperes. The C163 series is equipped with a double-break contact. As the contactor is bistable, the change between the two stable switching conditions “main contact open” and “main contact closed” takes place by means of a short switching impulse of only 100 ms, i.e. without power consumption from the coil in the final positions. The contactors have a mechanical working life of over three million operating cycles and an electrical working life of over 100,000. More information is available at: www.schaltbau-gmbh.de.
“Connect – Contact – Control” is the motto under which Schaltbau GmbH develops and manufactures electromechanical components for railway equipment and industrial applications. Founded in 1929, the company has nine locations of its own and more than 60 sales partners worldwide. The Schaltbau range of products includes connectors, snap-action switches and contactors as well as control and indicating devices. The Schaltbau GmbH quality management system is certified in accordance with DIN EN ISO 9001 and its ecological management system in accordance with DIN EN ISO 14001. The company has been certified as a Q1 supplier to Deutsche Bahn (German Rail) since 2008. The Velden and Aldersbach plants have been quality-certified in accordance with IRIS (International Railway Industry Standard) since October 2008.
Schaltbau GmbH
Ms Svenja Bierbrauer, Marketing
Hollerithstraße 5
D-81829 München
bierbrauer@schaltbau.de
www.schaltbau-gmbh.de
Tel: +49 89 930 05-153
Fax: +49 89 930 05-156
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Schaltbau GmbH sponsors electric car of Bochum University of Applied Sciences here
News-ID: 195613 • Views: …
More Releases from Schaltbau GmbH
Schaltbau GmbH exhibiting at InnoTrans for the tenth time
Munich, 18 August 2014: Under the motto “Customizing is Our Standard” Schaltbau GmbH will be exhibiting its innovations in railway engineering at this year’s InnoTrans in Berlin (September 23 to 26) at stand 102 in hall 2.2. Highlighted will be the new S337 Series configurable master controller, the CH1130/02 update of the CH Series high-voltage contactor, and the newly developed replacement insert for the receptacle of the UIC558 Series connector.…
Schaltbau GmbH: groundbreaking ceremony for plant expansion
Munich, 29 July 2013: Schaltbau GmbH is expanding production capacities at its
Velden and Aldersbach plants, both located in Lower Bavaria. The company is investing a total of seven million euros in new buildings and production equipment, in order to generate additional growth with innovative Schaltbau products and bolster the job situation in the region.
Schaltbau is investing in state-of-the-art production buildings at both sites. After a nine-month construction period,…
Schaltbau GmbH: new high-performance charging connector for industrial trucks
Munich, 13 June 2013: The new LV-HPC (High Power Connector) charging connector made by Schaltbau meets the DIN VDE 0623-589 standards for a greater current-carrying capacity. The series is therefore suitable for state-of-the-art fast chargers such as those used with industrial trucks. A red-coded keying pin signifies operation at 120, 250 and 400 amperes for charging wet-cell batteries and serves to prevent mismating at the same time.
The latest generation…
Schaltbau GmbH snap-action switches used by Heidelberger Druckmaschinen AG
Munich, 29 April 2013: Schaltbau’s latest S970-series snap-action switches are installed in sophisticated printing machines made by Heidelberger Druckmaschinen AG. These hardwearing, highly efficient components operate as position and limit switches in the printing and coating units of state-of-the-art sheet-fed offset printing presses.
The snap-action switches installed in these machines are exposed to severe conditions. Not only do they need to be resistant to aggressive chemical detergents, they also have…
More Releases for C163
Needle Based Biopsy Gun Market Is Likely To Rise USD 802.39 million with Excelle …
Global Needle Based Biopsy Gun Market, By Product Type (Disposable, Reusable), Applications (vacuum-assisted biopsy devices (VAB), core needle biopsy devices (CNB), and fine needle aspiration biopsy devices (FNAB)) - Industry Trends and Forecast to 2029
NEEDLE BASED BIOPSY GUN MARKET ANALYSIS AND INSIGHT
Data Bridge Market Research analyses a growth rate in the needle based biopsy gun market in the forecast period 2022-2029. The expected CAGR of global needle based biopsy gun…
