3D Concrete Printing Market Insights by Growth, Emerging Trends and Forecast By 2027

Global 3D concrete printing market size accounted for $310.9 million in 2019, and is expected to reach $40,652.4 million by 2027, registering a CAGR of 106.5% from 2020 to 2027. In 2019, North America dominated the global 3D concrete printing market, accounting for around 42.1% share of the global 3D concrete printing industry, followed by Europe.

3D concrete printing refers to construction of building structures and other aesthetic structures in various sizes and shapes by using automated printer. The printers are operated through feeding the program in the software. This software will operate the printer to travel in the desired path that is been programmed into it. The dispensing of concrete through the nozzle is also controlled by the software. Extrusion-based 3D printing uses a screw device or pneumatic actuator to feed material through a cartridge and into a needle or nozzle for layer by layer deposition.

Conversely, powder-based 3D printing is the process carried out by depositing binding solution onto the ceramic powder bed through a print nozzle. This leads to bonding of these surface areas together to form the pre designed solid part laying one layer at a time. Upon drying the concrete, the product is extracted from the bed and excess powder is eliminated by air jet sprays. Ready-mix, high-density, precast, and shotcrete are the material types that are commonly used for 3D printing. However, these material types are produced with various grades of materials depending on their application.

Request For TOC@ https://www.alliedmarketresearch.com/request-toc-and-sample/1550

High cost of skilled labor increases the overall cost of the project. Moreover, complicated designs incur extra cost as well as consume excess time, if built manually. Despite of this, one cannot guarantee flawless and desired output due to manual errors. With the use of 3D printers, exact output and minimum wastage of construction material could be achieved. Moreover, mass production of irregular or customized shapes and sizes can be affordable and time saving.

However, high capital cost of the printers and their operating systems act as major the restraint of the market. Moreover, the outbreak of COVID-19 pandemic has negatively impacted the market. To prevent the spread of the virus, governments across various countries have implemented lockdown. Thus, construction and production activities were partially or completely closed due to the lockdown. This affected the 3D concrete printing industry as well as led to the disruption of the supply chain. However, reopening of production facilities gradually is anticipated to re-initiate the production of concrete and 3D printer companies at their full-scale capacities.

Inquiry for Discount@ https://www.alliedmarketresearch.com/purchase-enquiry/1550

The report analyzes the global 3D concrete printing market on the basis of printing type, technique, end-use sector, and region. The printing types covered in this report are gantry system and robotic arm. The techniques taken into consideration in the study include extrusion-based and powder-based. The end-use sector segment is segregated into residential, commercial and infrastructure.

Region wise, the market analysis is conducted across North America (the U.S., Canada, and Mexico), Europe (Germany, France, the UK, Denmark, and rest of Europe), Asia-Pacific (China, Japan, India, South Korea, and rest of Asia-Pacific), and LAMEA (Latin America, the Middle East, and Africa).

Get detailed COVID-19 impact analysis on the 3D Concrete Printing Market @ https://www.alliedmarketresearch.com/request-for-customization/1550?reqfor=covid

Key findings of the study:
• By printing type, the gantry system segment was the highest revenue contributor in 2019.
• By technique, the extrusion-based segment generated the highest revenue in 2019.
• By end-use sector, the residential segment led the market in 2019.
• Region wise, North America garnered the largest market share in 2019.

The major players profiled in the 3D concrete printing market include Apis Cor, Cobod International A/S, CyBe Construction, D-shape, Heidelbergcement AG (Italcementi SpA), LafargeHolcim, Sika AG, Skanska, Yingchuang Building Technique (Shanghai) Co., Ltd. (Winsun), and XtreeE.

Contact us:
David Correa
5933 NE Win Sivers Drive
#205, Portland, OR 97220
United States
Toll Free: 1-800-792-5285
UK: +44-845-528-1300
Hong Kong: +852-301-84916
India (Pune): +91-20-66346060
Fax: +1-855-550-5975
help@alliedmarketresearch.com
Web: www.alliedmarketresearch.com
Follow us on: https://www.linkedin.com/company/allied-market-research

About us:
Allied Market Research (AMR) is a full-service market research and business-consulting wing of Allied Analytics LLP, based in Portland, Oregon. AMR provides global enterprises as well as medium and small businesses with unmatched quality of "Market Research Reports" and "Business Intelligence Solutions." AMR has a targeted view to provide business insights and consulting to assist its clients to make strategic business decisions and achieve sustainable growth in their respective market domain.
AMR introduces its online premium subscription-based library Avenue, designed specifically to offer cost-effective, one-stop solution for enterprises, investors, and universities. With Avenue, subscribers can avail an entire repository of reports on more than 2,000 niche industries and more than 12,000 company profiles. Moreover, users can get an online access to quantitative and qualitative data in PDF and Excel formats along with analyst support, customization, and updated versions of reports.

This release was published on openPR.