openPR Logo
Press release

CONFAST Carbide Hammer Bit Now Available

08-12-2021 11:35 PM CET | Industry, Real Estate & Construction

Press release from: Confast Concrete Fasteners

/ PR Agency: NSG Consulting Inc

Straight shank bits, or Hammer bits, are carbide-tipped bits used for drilling holes in concrete, brick or block base material. The tip of the bit is made out of carbide.

These carbide-tipped bits are used in mechanical hammer drills.

The straight shank bits are attached to the hammer drills via a chuck. The straight-shanked bit is used in a Jacobs style chuck (a chuck in which a key is used).

Confast’s straight shank bits are American made of premium quality steel and carbide. Straight shank bits are available in diameters from 1/8" to 1-1/2" and up to 24" in length.

Products Features

TRICARB® CARBIDE: Guarantees longer bit life and speedier penetration due to increased chiseling action

THUNDERTWIST® FLUTE DESIGN: Faster dust removal allows faster drilling

COPPER BRAZING: Increased bonding of carbide to steel results in improved reliability

VACUUM HEAT TREATED: Provides superior strength under the toughest conditions

SHANK 6 -sided hex

LENGTH MEASUREMENT End to End

DIAMETER 1/8"

LENGTH: 3"

Concrete Fastening Systems, Inc. 1231 E. 26th St Cleveland, OH 44114 United States of America
1-216-357-7431

Press
Nanette Gregory
nanette@nsgconsultinginc.com.

Concrete Fastening Systems, Inc. has been selling concrete fasteners for over 35 years from a fully stocked warehouse in Cleveland, Ohio. Free, same-day shipping in every length and diameter is available by ordering at www.confast.com, followed by product delivery within 1-3 days.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release CONFAST Carbide Hammer Bit Now Available here

News-ID: 2354134 • Views:

More Releases from Confast Concrete Fasteners

CONFAST Male Hurricane Anchors Now Available
CONFAST Male Hurricane Anchors Now Available
CONFAST 1/4"-20 x 2-1/4" Male Hurricane anchors install quicker and more efficiently than other storm protection anchoring products. For concrete and concrete block applications, drill pilot hole and drive the anchor in, it's that easy. Pre-drilling is not required in wood base materials. Full thread engagement in concrete, concrete block and wood is required for best performance. Stucco-faced surfaces usually require countersinking so that the top of the hurricane anchors set flush
CONFAST Introduces The #10-12 Plastic Conical Blue Bantam Anchor Kit--- Includes Anchors, Screws and Drill Bit
CONFAST Introduces The #10-12 Plastic Conical Blue Bantam Anchor Kit--- Includes …
This new CONFAST® fastener kit, available free with a $25 order, is great for many light-duty uses - Install doorbells, curtain rods, pictures, light mirrors, photo frames, lights in drywall, plaster board, gypsum board, brick wall, concrete wall or wood wall. Easy to Install - use included bit to drill hole, insert the anchor, and place the item against the wall over the anchor, then drive the screw through the hole
Confast Drop-In Anchors Now Available for Suspending Electrical Cable Trays, HVAC Ductwork and Fire Sprinkler Pipe, Heads and More
Confast Drop-In Anchors Now Available for Suspending Electrical Cable Trays, HVA …
• Drop-In anchors should only be used in solid concrete. • Their main use is to insert threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads. • They can be used in applications that require a flush mounted anchor and when a bolt needs to be inserted and removed. • A setting tool is required to set the anchor in the concrete. Technical Specifications: There are numerous technical specifications
CONFAST Flat Phillips 410 Stainless concrete screws
CONFAST Flat Phillips 410 Stainless concrete screws
CONFAST® Flat Phillips 410 Stainless concrete screws are designed for a fast and easy installation with optimal holding strength and providing long-​lasting rust resistance for exterior use. Products Features Include: EASY​INSTALLATION : Fast ​easy ​installation;​saves ​time ALL LENGTHS: One stop shopping, saves time and money PACKAGED 50 PCS: Less waste, save dollars 1 BIT WITH EVERY 50 SCREWS: More value Product Specifications: BIT SIZE: 3/16" = 5/32" 1/4"= 3/16" BOX QTY: 50 MINIMUM EMBEDMENT:

All 5 Releases


More Releases for Straight

Top Plumbing Tips Straight from a Licensed Plumber
When your sink starts gurgling like it's haunted, your toilet refuses to flush, or your shower turns into a sad drizzle, there's one person who instantly becomes your new best friend-a plumber [https://www.idahosplumber.com/nearme/caldwell-id#:~:text=Expert-,Plumber,-%26%20HVAC%20Contractor%20Near]. Whether you're knee-deep in water or just trying to avoid your next plumbing disaster, getting advice straight from the pros can save you a ton of time, money, and stress. That's why we've gathered some top tips
Global Straight Grinders Market Research Report 2023-2029
A straight grinder a hand-held power tool used for grinding using abrasive products such as plain resinoid wheels, flap wheels, or spindle-mounted points and wheels. Straight Grinders report published by QYResearch reveals that COVID-19 and Russia-Ukraine War impacted the market dually in 2022. Global Straight Grinders market is projected to reach US$ 673.2 million in 2029, increasing from US$ 557.4 million in 2022, with the CAGR of 2.7% during the period
SETTING THE RECORD STRAIGHT
Johannesburg, 19 November 2019:- Further to various false media allegations made by PGC Group of Companies (PGC) former-CEO, Zwilenkosi (Zwi) (Reuben) Mdletshe, PGC and its trustees, wish to set the record straight once and for all to lay this matter to rest. In December last year, the President of POPCRU, Mr Zizamele Cebekhulu approached Mr Mpho Dipela, the ex-Financial Director of PGC, for assistance to investigate matters of financial concern
Europe Straight Plate System Industry Report 2016
The recently published report titled Europe Straight Plate System Industry 2016 Market Research Report is an in depth study providing complete analysis of the industry for the period 2016 – 2021. It provides complete overview of Europe Straight Plate System market considering all the major industry trends, market dynamics and competitive scenario. The Europe Straight Plate System Industry Report 2016 is an in depth study analyzing the current state of the
Straight Line PR Offers Affordable PR Membership Packages
Straight Line PR is a public relations and marketing agency which provides business to business communication within the trade media now offers Membership packages for Press releases and video distribution services. Mumbai, India, September 11, 2013 - Straight Line PR (http://straightlinepr.com) is an online public relations firm based out of Mumbai, India, offering affordable and highly effective press release distribution services that are ideal for organizations of all types and sizes.
Coface Arena: Back Straight Becomes ORGENTEC Stands
The Mainz-based company ORGENTEC Diagnostika has extended its involvement with 1. FSV Mainz 05 and will continue to sponsor stands at the new Coface Arena in Mainz. As they did in the Bruchweg Stadium, the globally active company, which specializes in laboratory tests, will keep the naming rights for the back straight in the new stadium built for FSV Mainz 05 for three years. In addition, ORGENTEC Diagnostika will have a