Press release
CONFAST Sammys Anchor Now Available Online
Product Specifications:
SUBSTRATE Concrete
DRIVE: Sammys® #14 (Black) Nut Driver (8113910)
ROD SIZE: 3/8"-16
MOUNT STYLE: Vertical
SUBSTRATE FASTENER SIZE: 5/16" x 1-3/4" LENGTH 1.75 DIAMETER 0.3125
Note: Use a 1200 maximum RPM drill for installation.
Do not install concrete screws while the drill unit is in impact mode — doing so will destroy the pullout factor of the fastener
Special Nut Driver System:
The nut drivers were designed with a unique spin-off feature which provides a fast and safe installation each time. When the face of the driver comes into contact with the material you are installing into, continue drilling until the nut driver spins free. Installation is then complete. Warranty requires the use of the appropriate nut driver for installations.
Installation Steps:
Using an SDS 250 carbide tip bit or a HEX RECEIVER with a #250 carbide tip bit, pre-drill the concrete member to a depth of 2” with a hammer/ rotary hammer drill set on impact mode.
After pre-drilling has been completed, install the SLEEVE TOOL over the bit (the bit should remain in the drill), and insert the #14SW (red) nut driver (p/n 8114910) into the opposite end.
Insert the SWC screw into the nut driver.
Place the tip of the screw into the pre-drilled hole, turn the impact/drill unit to drill mode and begin insertion. When the nut driver spins free on the SWC screw, installation is complete. Stop and remove drill.
The SWC screw is ready to receive 1/4”, 3/8” or metric all thread rod or bolt stock.
1231 E. 26th St Cleveland, OH 44114
216-357-7431
mike@confast.com.
Press
Nanette Gregory
nanette@nsgconsultinginc.com
Concrete Fastening Systems, Inc. has been selling concrete fasteners for over 30 years from a fully stocked warehouse in Cleveland, Ohio. Free, same-day shipping in every length and diameter is available by ordering at www.confast.com, followed by product delivery within 1-3 days.
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release CONFAST Sammys Anchor Now Available Online here
News-ID: 2429520 • Views: …
More Releases from Confast Concrete Fasteners
CONFAST Male Hurricane Anchors Now Available
CONFAST 1/4"-20 x 2-1/4" Male Hurricane anchors install quicker and more efficiently than other storm protection anchoring products.
For concrete and concrete block applications, drill pilot hole and drive the anchor in, it's that easy. Pre-drilling is not required in wood base materials. Full thread engagement in concrete, concrete block and wood is required for best performance.
Stucco-faced surfaces usually require countersinking so that the top of the hurricane anchors set flush…
CONFAST Introduces The #10-12 Plastic Conical Blue Bantam Anchor Kit--- Includes …
This new CONFAST® fastener kit, available free with a $25 order, is great for many light-duty uses - Install doorbells, curtain rods, pictures, light mirrors, photo frames, lights in drywall, plaster board, gypsum board, brick wall, concrete wall or wood wall.
Easy to Install - use included bit to drill hole, insert the anchor, and place the item against the wall over the anchor, then drive the screw through the hole…
Confast Drop-In Anchors Now Available for Suspending Electrical Cable Trays, HVA …
• Drop-In anchors should only be used in solid concrete.
• Their main use is to insert threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads.
• They can be used in applications that require a flush mounted anchor and when a bolt needs to be inserted and removed.
• A setting tool is required to set the anchor in the concrete.
Technical Specifications:
There are numerous technical specifications…
CONFAST Flat Phillips 410 Stainless concrete screws
CONFAST® Flat Phillips 410 Stainless concrete screws are designed for a fast and easy installation with optimal holding strength and providing long-lasting rust resistance for exterior use.
Products Features Include:
EASYINSTALLATION : Fast easy installation;saves time
ALL LENGTHS: One stop shopping, saves time and money
PACKAGED 50 PCS: Less waste, save dollars
1 BIT WITH EVERY 50 SCREWS: More value
Product Specifications:
BIT SIZE: 3/16" = 5/32" 1/4"= 3/16"
BOX QTY: 50
MINIMUM EMBEDMENT:…
