Press release
Infrared Heat Increases Productivity of Flameproof Textiles
High-quality home textiles for curtains, armchairs and sofas should not only look decorative, they also have to be hard-wearing and flameproof. Textiles usually get flame-retardant by a coating with special chemicals or saline solutions.By retrofitting a new, Heraeus medium wave infrared system at their South Ockenden factory, Essex Flameproofing have been able to treble the capacity of the drying process used in the production of fire retarding upholstery and curtains. At the same time, they have also significantly reduced energy consumption.
Forgotten candles or a short circuit in the toaster - just at home it can burn fast if one does not pay attention. Curtains and home textiles should not contribute to the spreading of a fire and therefore they have to be equipped with flame-retardant properties.
Essex Flameproofing is a long-established company which works with designers and specifiers, fabric manufacturers, major retailers and upholsterers to impart fire-retarding properties to furniture and fittings. This is achieved by treating the fabric of the upholstery or curtains with flame-retardant chemicals to comply with British and foreign standards and flame retarding regulations. The application of the relevant chemicals/coatings is a wet process and drying is, necessarily, an important production stage.
Upholstery is made fire-resistant by spraying the back of the upholstery cloth with a latex flame-retardant coating, which must then be dried. Previously this was achieved by heating the coated upholstery web with a long wave infrared system. However, to meet increasing demand for the company’s expertise, it was decided to investigate ways of speeding up the drying process.
As a result, a new Heraeus medium wave infrared system was retrofitted at the Ockenden factory. This consists of an aluminium framework, which houses 21, 4.5kW emitters, which are arranged to be switched on and off in seven banks of three emitters, to match the heating profile to the product to be dried. Such has been the success of the new system, which is ready to run within one minute of switch-on, that coated upholstery fabric can be dried in a single pass whereas three passes were often required with the previous system. This is partly due to the efficiency of medium wave infrared in water removal, as radiation at medium wave frequency is readily absorbed by water molecules and the energy is rapidly converted into heat.
The new system also finds further employment when it is used to provide extra capacity to dry treated curtains. Curtains are made fire-retardant by spraying them with a salt-based solution, which soaks into the fibres. When curtains come Scotch guarded, or when fabrics have low permeability, the uptake of the solution needs to be assisted by passing the wetted curtain through nip rollers. Normally, curtains are dried on their own line, but when there is capacity on the new Heraeus system, they are passed through for
drying, again at twice to three times the speed.
Heraeus Noblelight GmbH with its headquarters in Hanau and with subsidiaries in the USA, Great Britain, France, China, Australia and Puerto Rico, is one of the technology and market leaders in the production of speciality light sources. In 2008, Heraeus Noblelight had an annual turnover of 92.5 Million € and employed 735 people worldwide. The organisation develops, manufactures and markets infrared and ultraviolet emitters for applications in industrial manufacture, environmental protection, medicine and cosmetics, research, development and analytical laboratories.
Heraeus, the precious metals and technology group headquartered in Hanau, Germany, is a global, private company with over 155 years of tradition. Our businesses include precious metals, sensors, dental and medical products, quartz glass, and specialty lighting sources. With product revenues approaching € 3 billion and precious metal trading revenues of € 13 billion, as well as over 13,000 employees in more than 110 companies worldwide, Heraeus holds a leading position in its global markets.
Heraeus Noblelight GmbH
Reinhard-Heraeus-Ring 7
D-63801 Kleinostheim
www.heraeus-noblelight.com/infrared
Press: Dr. Marie-Luise Bopp
marie-luise.bopp@heraeus.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Infrared Heat Increases Productivity of Flameproof Textiles here
News-ID: 78688 • Views: …
More Releases from Heraeus Noblelight

Infrared Heating helps to ensure quality in the manufacture of composite structu …
An infrared heating system from Heraeus Noblelight is helping to ensure the high quality of composite aerospace structures manufactured at the new GKN Aerospace facility at Western Approach, near Bristol. The system, which is used to provide interim processing of the laid-up composite rear spar assembly of the Airbus 350 XWB to prevent subsequent wrinkling, was custom-designed and developed in close co-operation with GKN Aerospace engineers following initial tests at…

Seven Good Reasons for the D2plus Light module
Heraeus Noblelight, one of the technology and market leaders in the field of specialty light sources will again exhibit at ANALYTICA, to be held in Munich, Germany in April 2012. Heraeus will introduce its “Seven Good Reasons for D2plus Light modules” at the show, making the life of instrument developers easier.
Developing new analytical instruments places ever-increasing demands on engineers, to design-in the best available light-source and avoid future operational problems.…

Specialty Light Sources for the Printing Industry
Hanau, February 2012
The Competence in Specialty Light Sources for printing systems
Special and personalized printing processes need special treatment. The ink of ink jet or laser printers need to be completely dried or cured before the printed sheets are passed on for subsequent operations such as stacking, cutting, folding or gluing. Infrared or UV technology is used for drying and curing, depending on the type of ink. Heraeus Noblelight presents its…

Infrared Emitters Improve Lacquered Surfaces
Many screens, internal claddings in cars and high value cosmetic packages are manufactured from plastics and contain a protective lacquer or finishing. The drying of the coating on the plastic components is not a trivial matter, for the surfaces need to be perfectly cured without applying to much heat to the plastic. Infrared heaters transfer energy in a contact-free manner and are easy to control. Consequently, the heat is precisely…
More Releases for Medium
Growing Medium Market Report 2024 - Growing Medium Market Share And Analysis
"The Business Research Company recently released a comprehensive report on the Global Growing Medium Market Size and Trends Analysis with Forecast 2024-2033. This latest market research report offers a wealth of valuable insights and data, including global market size, regional shares, and competitor market share. Additionally, it covers current trends, future opportunities, and essential data for success in the industry.
Ready to Dive into Something Exciting? Get Your Free Exclusive Sample…
Medium Voltage Cables Market is Driven by the Need for Reliable and High-Quality …
Medium voltage cables are used to transmit and distribute electricity at voltages ranging from 1 kV to 72.5 kV. The most common type of medium voltage cable is the underground power cable, which is used to carry electricity from the utility's power lines to homes and businesses. Medium voltage cables are also used in industrial and commercial applications, such as powering factory equipment or lighting large buildings.
Request for Free Sample-…
Global Medium Power Transformers Market | Global Medium Power Transformers Indus …
Medium power transformers market comprises of sales of medium power transformers. Medium powers transformers are utilized in lowering voltages to the level required and are adequate for voltage regulations. These types of transformers are generally used in the construction and manufacturing industries. These medium power transformers manufacturing establishments manufacture the power transformers with ratings of 501 MVA to 800 MVA.
According to study, “Medium Power Transformers Global Market Report 2020-30:…
Global Medium Switchgear Market | Global Medium Switchgear Industry | Medium Swi …
Medium voltage switchgear market comprises of sales of medium voltage switchgear & related services that manufacture the medium voltage switchgear which are electrical switchgear rated between 2KV and 36KV. Medium voltage switchgear is a combination of electrical switches, fuses/circuit breakers used to function, secure and separate electrical equipment. It is used for providing protection to different electric motor control systems that installed in different end user segments.
According to study,…
Medium-Density Fiberboard (MDF) Manufacturers - IMARCGroup
Medium-density fiberboard (MDF) is a composite wood product that is considerably denser than plywood or dimension lumber. The manufacturing process of MDF involves the procurement of wood residues from sawmills. This wood residue is then placed in a pressurized vessel known as a digester to cook the wood in preparation for refining into fibers. After this, several other processes such as refining, blending, drying, forming, hot pressing, sanding and sawing…
Global Growth Medium Market Insights, On Demand, Future Trends, Market Growth, D …
Market Research Hub (MRH) has actively included a new research study titled “Global Growth Medium Market Insights, Forecast to 2025” to its wide online repository. The concerned market is discoursed based on a variety of market influential factors such as drivers, opportunities and restraints. This study tends to inform the readers about the current as well as future market scenarios extending up to the period until 2025. In addition, a…