Press release
Automotive Windshield Market Report 2022: By Production, Capacity Utilization Rate, Ex-Factory Price, Revenue, Cost, Gross and Gross Margin Analysis
A fresh study, covering “Automotive Windshield Market Forecast, Trend Analysis & Competition Tracking: Global Review 2017 to 2022” has been broadcasted to wide online repository of Fact MR, which presents deep focus on the Retail & Consumer Goods Market. This smart study contains precise data that offers a clear insight about market current scenario and future projections for the benefit of readers. Moreover, the study enclosed significant data which tends to make the research a powerful source for analysts and industry experts who are looking to gain necessary knowledge about the prevailing market trends, opportunities and drivers present in the “Automotive Windshield Market”.Request for Sample Report- https://www.factmr.com/connectus/sample?flag=S&rep_id=13
The global automotive windshield market is expected to witness a steady rise at 5.2% CAGR during the forecast period 2017 to 2022, according to a recent study by Fact.MR. The report anticipates revenues from the global automotive windshield market to account for nearly US$ 14,000 Mn in 2017. By 2022, revenues from the market will reach US$ 17,681.2 Mn.
PC Segment Has Most Scope in Automotive Windshield Market
The passenger car segment is predicted to be worth largest market valuation by end 2022, and will witness steady growth over the forecast period. The PC segment accounts for a large revenue share by vehicle type in the automotive windshield market and APEJ contributes nearly half. The LCV segment is somewhat less attractive but it still represents a lucrative market opportunity at the end of the forecast period. Key stakeholders would do well to focus on the Europe LCV segment along with APEJ as the former should record a moderate CAGR and will surpass billion-dollar value at the end of the five-year period.
Smaller Potential in HCV Segment of Automotive Windshield Market
The HCV segment is much smaller than either the PC or LCV segment in the Automotive Windshield Market but it would be foolhardy to overlook it entirely in favour of the latter two as it is a market of roughly US$ 1.7 billion in 2017 itself. The fast-growing, dynamic APEJ region is anticipated to account for the largest contribution of a little less than half of global market throughout the forecast period and the APEJ HCV market could touch a billion-dollar value by end 2022 which would be an impressive growth in five years.
Browse Full Report with TOC- https://www.factmr.com/report/13/automotive-windshield-market
Table of Content:
Chapter 1. Global Automotive Windshield Market - Executive Summary. 11
Chapter 2. Global Automotive Windshield Market Overview. 13
2.1. Introduction. 13
2.1.1. Global Automotive Windshield Market Taxonomy. 13
2.1.2. Global Automotive Windshield Market Definition. 13
2.2. Global Automotive Windshield Market Size (US$ Mn) and Forecast, 2012-2022. 13
2.2.1. Global Automotive Windshield Market Y-o-Y Growth. 13
2.3. Global Automotive Windshield Market Dynamics. 14
2.4. Supply Chain. 17
2.5. Cost Structure. 17
2.6. Key Participants Market Presence (Intensity Map) By Region. 18
2.7. Competitive Assessment and Technology Trends in Future. 18
Chapter 3. Global Automotive Windshield Market Analysis and Forecast By Vehicle Type. 19
3.1. Global Automotive Windshield Market Size and Forecast By Vehicle Type, 2012-2022. 19
3.1.1. PC Automotive Windshield Market Size and Forecast, 2012-2022. 19
3.1.1.1. Revenue (US$ Mn) Comparison, By Region. 19
3.1.1.2. Market Share Comparison, By Region. 21
3.1.1.3. Y-o-Y growth Comparison, By Region. 21
3.1.2. LCV Automotive Windshield Market Size and Forecast, 2012-2022. 22
3.1.2.1. Revenue (US$ Mn) Comparison, By Region. 22
3.1.2.2. Market Share Comparison, By Region. 24
3.1.2.3. Y-o-Y growth Comparison, By Region. 24
Continued….
Check Discount on This Report- https://www.factmr.com/connectus/sample?flag=D&rep_id=13
About Fact.MR
Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized automotive market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.
Contact Us
Fact.MR
Suite 9884
27 Upper Pembroke Street,
Dublin 2, Ireland
Telephone: +353-1-6111-593
Email: sales@factmr.com/
Web: https://www.factmr.com/
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Automotive Windshield Market Report 2022: By Production, Capacity Utilization Rate, Ex-Factory Price, Revenue, Cost, Gross and Gross Margin Analysis here
News-ID: 977597 • Views: …
More Releases from Fact.MR

Corrosion under Insulation Monitoring Market is Projected to Reach USD 475.2 Mil …
The global corrosion under insulation (CUI) monitoring market is valued at USD 140 million in 2025 and is projected to grow at a CAGR of 13.0%, reaching USD 475.2 million by 2035. This expansion reflects the increasing need for advanced monitoring solutions in industries like oil & gas, chemical, and power, where CUI poses significant risks to infrastructure integrity. Historical growth from 2020 to 2024 was at a CAGR of…

Modular Biometric Access Control Terminals Market Valued at US$ 1.3 Billion in E …
Modular Biometric Access Control Terminals Market is projected to grow from USD 11.3 billion in 2025 to USD 31.4 billion by 2035, expanding at a CAGR of 10.8% during the forecast period. This significant growth is driven by advancements in technology, transitioning from manual lock systems to electronic entry systems, and the widespread adoption of modular biometric terminals for enhanced security. These systems are increasingly vital in commercial, residential, and…

U.S. Patient Positioning System Market Growth Supported by Rising Diagnostic and …
The U.S. patient positioning system market was valued at USD 228 million in 2024 and is projected to grow at a CAGR of 4.5% from 2025 to 2035, reaching USD 370 million by the end of the forecast period. This growth represents an absolute dollar opportunity of USD 131.6 million, driven by increasing surgical procedures, technological advancements, and rising healthcare needs. Historically, the market expanded at a CAGR of 4.0%…

Mixed Mode Chromatography Resin Market is Projected to Reach USD 743 Million and …
Mixed mode chromatography resins market is valued at USD 172 million in 2025 and is projected to grow at a CAGR of 15.7%, reaching USD 743 million by 2035. These resins use multimodal ligands, enabling protein binding through ionic, hydrogen bonding, and hydrophobic interactions, offering improved selectivity, resolution, and capacity compared to single-mode systems. This growth is driven by the increasing demand for sophisticated purification methods in biologics and biosimilar…
More Releases for Automotive
Automotive Grommet Market set for explosive growth: Cooper Standard Automotive, …
According to HTF MI, "Global Automotive Grommet Market: Industry Trends, Share, Size, Growth, Opportunity and Forecast 2024-2030". The Global Automotive Grommet Market is anticipated to grow at a compound annual growth rate (CAGR) of 5.96% from 2024 to 2030, reaching USD 100 Billion in 2024 and USD 150 Billion by 2030.
Automotive grommets are protective rings or eyelets made from rubber or plastic, used to protect or cover holes in metal…
KSA Automotive Market | KSA Automotive Industry | KSA Automotive Industry Resear …
Saudi Arabia’s automotive market faced a decline in new car sales due to tripling of value-added tax (VAT) rates. Effective in July 1, 2020, Saudi Arabia hiked its VAT from 5% to 15%.
Vision 2030 trying to attract foreign investment to kick start Dammam manufacturing city to aid re-exports & fulfill domestic demand
Surge in Domestic Manufacturing to gain independence of Imports: With Vision 2030, KSA is trying to gain impendence of…
Automotive Fuel Injectors Market: Growing Automotive Sales Fueling Automotive Fu …
Automotive fuel injectors market is likely to grow at a steady pace in the long run, according to a new report by Fact.MR. The demand for automotive fuel injectors continues to remain influenced with a multitude of industry-specific and macroeconomic factors. Significant growth in the automotive sector, coupled with increasing vehicle fleet remain instrumental in driving the demand for automotive fuel injectors worldwide. Fact.MR estimates that the sales of automotive fuel injectors are expected…
Global Automotive Safety Market 2019 Worldwide Outlook By Autoliv, Delphi Automo …
Automotive safety systems are designed to comply with the standards and regulations prescribed by government agencies and transport authorities worldwide. Passive safety systems are designed to protect passengers, drivers, and pedestrians during an accident.
In terms of region, the global Automotive Passive Safety Systems market can be segmented into North America, Europe, Asia Pacific, and Middle East & Africa. Asia Pacific is likely to hold a prominent share of the global…
Global Oil Pump for Automotive Market 2018 Analysis -Bosch,Denso,Aisin Seiki,Del …
According to this study, over the next five years the Oil Pump for Automotive market will register a xx% CAGR in terms of revenue, the global market size will reach US$ xx million by 2023, from US$ xx million in 2017. In particular, this report presents the global market share (sales and revenue) of key companies in Oil Pump for Automotive business.
Get Sample Copy of this Report for more Information…
Global Automotive Body Welded Assembly Market 2018 - Daesan, Baylis Automotive, …
Accord Market, recently published a detailed market research study focused on the “Automotive Body Welded Assembly Market” across the global, regional and country level. The report provides 360° analysis of “Automotive Body Welded Assembly Market” from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global PP Pipe industry, and estimates the future trend of…