Press release
Boundary Scan Software Platform SYSTEM CASCON™ provides Test Vector Link for IEEE1450 (STIL)
GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions compliant with IEEE Std.1149.x introduces a new test vector interface as a new extension of its software platform SYSTEM CASCON™.The newly developed vector link is based on IEEE1450 – Standard Test Interface Language (STIL) – and enables the seamless coupling during test pattern export, in particular to chip testers.
“A whole series of chip manufactures already use our system to validate prototypes on board level. The universal STIL interface provides them a solution for seamless migration of complete test pattern to existing production testers”, announces Bettina Richter, Corporate Marketing Manager with GOEPEL electronic. “At the same time, this system extension enables a yet better compatibility and networking ability of our tools to available EDA and CAT environments on chip and at board level.”
The IEEE1450 interface’s central element is an export post processor that transfers existing test pattern to a respective STIL format. In addition to serial scan data, also parallel vectors including, expect and mask values as well as the necessary timing information are exported.
Beyond Std. IEEE1149.1 tests, the export post processor supports the transfer of IEEE1149.6 operations for the test of Advanced Digital Networks.
On this basis, test pattern generated and verified in SYSTEM CASCON™ can seamlessly be migrated to a production tester. It does not matter whether test pattern have been generated automatically with ATPG or manually scripted. An import of IEEE1445 (DTIF) simulation data into the system environment with subsequent validation and later export as IEEE1450 is also possible. Additionally, identical cross transfers are supported for JESD71 (STAPL), SVF (Serial Vector Format), TDS (TSSI) and further formats.
The new vector link for IEEE1450 is integrated as standard in the platform license from SYSTEM CASCON™ version 4.5.3 and is activated by the licence manager.
The professional JTAG/Boundary Scan development environment SYSTEM CASCON™ has been created by GOEPEL electronic, and includes more than 45 completely integrated ISP, test, debug and design validation tools.
For users with valid software maintenance contracts this enhancement release is available for down load free of charge.
About GOEPEL electronic:
GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. With more than 100 product launches the company became the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 7,000 system installations. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 160 employees and generated a revenue of 17.9 Million Euro in 2009. GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at www.goepel.com.
GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK
Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk
Stefan Meissner
press@goepel.com
www.goepel.com
www.goepel.com/twitter
www.goepel.com/youtube
www.goepel.com/linkedin
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Boundary Scan Software Platform SYSTEM CASCON™ provides Test Vector Link for IEEE1450 (STIL) here
News-ID: 137631 • Views: …
More Releases from GOEPEL electronics Ltd.
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems.
http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html
“In the development…
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA).
http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html
The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also…
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies.
http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html
The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably.
Based on an enhanced SCANFLEX® architecture with…
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport.
http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html
This gain in effectiveness for users is enabled by the OptiCon…
More Releases for IEEE
Substation Earthing - Methods & Materials as per IEEE 80
21st September 2023: Axis India, a renowned leader in electrical and engineering solutions, is proud to introduce its state-of-the-art Substation Earthing systems, meticulously designed to adhere to the stringent guidelines outlined in the IEEE 80 standard. This revolutionary offering reaffirms Axis India's commitment to innovation and excellence in electrical engineering.
Substation Earthing plays a pivotal role in ensuring electrical installations' safety, reliability, and operational integrity.
The Importance of Substations Earthing
Let's explore!…
Optical Gigabit Ethernet Becomes IEEE Standard
KDPOF Welcomes New IEEE 802.3bv(TM) Specification for Robust and Reliable Optical Data Transmission in Automotive Applications
KDPOF – leading supplier for automotive gigabit connectivity over POF (Plastic Optical Fiber) – welcomes IEEE's publication of the new standard amendment for 1000 Mb/s Ethernet operation over plastic optical fiber. As an amendment to the IEEE 802.3™ standard, IEEE Std 802.3bv(TM) for gigabit Ethernet over POF defines physical layer specifications and management parameters for…
Free IEEE Computer Society Will Demonstrate How to Automate Agile Metrics
LOS ALAMITOS, Calif., 1 February 2013 – If typical agile metrics like burndown and velocity aren't automated, it can become burdensome. However, automation can relieve the burden from project members, while ensuring that management has up-to-date, accurate information to use as the basis for decision-making.
Register for a free webcast called "Build Quality Products by Leveraging Agile Development and Automated Metric Reporting" and you will learn how automating metric gathering helps…
GÖPEL electronic demonstrates IJTAG (IEEE P1687) support in SYSTEM CASCON
At International Test Conference (ITC) 2011 in Anaheim, CA, GÖPEL electronic demonstrates a prototype version of the company’s JTAG / boundary-scan software platform SYSTEM CASCON™ with integrated tools supporting the current version of the upcoming IEEE P1687 (IJTAG) standard. IEEE P1687 focuses on the standardization of the access to and the documentation of the control of chip-embedded instruments, without limiting the number or type of instruments. Compatible test systems allow…
LayerZero Co-Founder Jim Galm Elevated To Senior IEEE Member Grade
Jim Galm, Vice President and Chief Technical Officer of LayerZero Power Systems, Inc., has been selected as a Senior Institute of Electrical and Electronics Engineers (IEEE) member. The grade of Senior Member requires experience reflecting professional maturity and significant professional achievements.
Jim Galm has contributed towards significant discoveries and advancements in the power distribution industry, having authored numerous patents, including LayerZero’s Dynamic Phase Compensation Technology. Jim Galm…
IXXAT’s IEEE 1588 PTP for STM32
IEEE 1588-2008 PTP Software from IXXAT for STM32 MCUs
The IEEE 1588-2008 protocol software from IXXAT, which is integrated in ap-plications worldwide, now is also available for the STM32Fx07 family from STMicroelectronics. These MCUs have an integrated IEEE 1588 hardware time stamping unit which allows the highly accurate synchronization of devices in a distributed network. On this base, an accuracy in the range of nanoseconds can be achieved. Typical applications are…
