Press Releases from IXXAT Automation GmbH (53 total)
Real-time operating system support for IXXAT's CAN interfaces
ECI driver for QNX, INtime, RTX and Linux
With the current ECI driver IXXAT offers a powerful programming interface for its CAN PC interfaces, specially adapted…
IXXEC-100 - The cost-effective EtherCAT Master solution for DIN rail mounting
With its new IXXEC-100, IXXAT offers a powerful and extremely flexible EtherCAT Master solution for DIN rail mounting at a very compelling price.
The EtherCAT Master…
FRC-EP190 - Communication platform for automotive bus systems with extensive sof …
With its new FRC-EP190, IXXAT offers a universal hardware platform for FlexRay, CAN, LIN and K-Line with impressive performance, a reasonable price and a wide…
Software package for the development of CANopen applications under Microsoft Win …
IXXAT Automation is pleased to announce the immediate availability of version 6.1 of the CANopen Master API. In addition to previously supported CAN interfaces, CANopen…
PROFINET-CANopen gateway
Powerful gateway enabling easy integration of CANopen devices in PROFINET networks
With its new PROFINET-CANopen gateway "COP-CON 220/PN", IXXAT offers a powerful and easily configurable gateway…
EtherCAT I/O Module
Flexible I/O Module for EtherCAT also available as board-level product
The new EtherCAT I/O Module "ETCio 100" from IXXAT enables the quick and easy connection of…
IEEE 1588 protocol software with new features for the telecommunication sector
The IEEE 1588 protocol software from IXXAT enables networking devices with accurate and reliable time synchronization for automation, automotive, measurement and telecommunication applications. Depending on…
PCI/104-Express Board Series for CAN (High/Low Speed) and LIN
IXXAT completes its PCI-Express series, consisting of serveral PCI-Express boards and a PCI-Express-Mini card, with two new variants based on the PCI/104-Express standard. The new…
CANblue II - Extended version enables easy PC access to CAN systems via Bluetoot …
IXXAT's CANblue II is now available in an extended version. In addition to the bridge and gateway mode, the intelligent CAN/Bluetooth module comes with a…
Diagnostic Extension for IXXAT's SAE J1939 Protocol Software
Along with the extension packages for NMEA2000 and ISO15765-2, IXXAT now offers the Diagnostic Extension package according to J1939-73 to extend the functionality of the…
New CANopen Master API Version 6
With the CANopen Master API, IXXAT offers a proven solution for a quick and easy development of PC based CANopen® control, test and service applications…
CAN becomes wireless - New CANblue II for wireless connection of CAN systems
With its new CANblue II/Generic, IXXAT offers an intelligent CAN/Bluetooth module providing both a bridge and gateway operation mode.
Especially in the service area, CANblue II/Generic…
New IXXAT sales office in Italy
IXXAT has opened a sales office in northern Italy in early November to expand its activities in the embedded system solutions, data communication and…
IXXAT opens subsidiary in France
Since 1998, IXXAT has been active in the area of industrial and automotive data communications in the French market, supported by its distributor I.S.I.T.…
Industrial Ethernet Module now conformance class B certified by PNO
IXXAT's Industrial Ethernet Module (IEM), which enables the fast and inexpensive connection of devices to PROFINET networks, has now been certified by the PNO in…
Budget-friendly FlexRay Analysis Kit
With the new FR-IB100/PCIe FlexRay card and the multibusAnalyser IXXAT enables customers to set-up a low-cost analysis platform for FlexRay devices and systems.
The multibusAnalyser for…
CAN Interface Trio for CAN, LIN and K-Line - New PCI Express Mini Card
With the new CAN-IB120/PCIe Mini, IXXAT extends its PCIe card series by a PCIe Mini format board with two CAN channels and galvanically isolated interfaces,…
IEEE 1588 IP Core extension for the telecommunication area and AVB networks
Many applications, in the telecommunication sector, in AVB networks as well as in the measurement and automation area, require a highly accurate time synchronization of…
canAnalyser Version 2.8
New features simplify operation and interaction with other tools
IXXAT's canAnalyser is a powerful analysis tool for CAN, CANopen, SAE J1939 and DeviceNet systems. Both…
SAE J1939 Designer from IXXAT for cross-product configuration and design
With SAE J1939 Designer, IXXAT offers a cost-effective Windows-based tool for cross-product configuration and design. SAE J1939 Designer comes with a catalog, containing all user-specific…
New IXXAT sales office in Switzerland
With its new sales office in Switzerland, IXXAT reacts to the increasing demand for CAN and Industrial Ethernet products, especially from Switzerland. Together with Mr.…
One card, many possibilities
Cost-effective and flexible low-profile PCIexpress card for
CAN, LIN and other bus systems
With the new CAN-IB100/PCIe IXXAT is treading new ways in terms of field bus…
NMEA 2000 support for J1939 protocol software from IXXAT
Especially for the development of devices and systems for the maritime sector, IXXAT now offers an extension for its proven J1939 protocol software according to…
Cost effective FlexRay PCIexpress card for analysis and control applications
With its new FR-IB100/PCIe IXXAT offers an extremely cost effective and high-performance interface card for FlexRay analysis and control applications as well as for the…
Universal I/O gateway for CAN and CANopen systems
With its new CANio 500, IXXAT offers a flexible I/O gateway for the easy and quick connection of analog and digital input and output signals…
New Version of the SAE J1939 Protocol Software
IXXAT now offers its SAE J1939 protocol software in an extended and revised version 2.02.
Besides an adaptation of the user interface, which now allows an…
IXXAT’s IEEE 1588 PTP for STM32
IEEE 1588-2008 PTP Software from IXXAT for STM32 MCUs
The IEEE 1588-2008 protocol software from IXXAT, which is integrated in ap-plications worldwide, now is also available…
New Sales Director at IXXAT
Thomas Waggershauser is the new Sales Director at IXXAT Automation GmbH.
In his new position, Thomas Waggershauser (34) is responsible for the sales activities of IXXAT…
Tool set for the complete analysis and surveillance of CAN networks
The analysis and diagnostic tools from IXXAT have been complemented by the new CBT2plus and CANobserver, enabling an even easier analysis and monitoring of CAN…
New boost for DeviceNet
DeviceNet, the first implementation of the Common Industrial Protocol (CIP) on CAN, which was developed more than 15 years ago, has seen a new boost…
New Management at IXXAT Automation GmbH
Prof. Dr.-Ing. Konrad Etschberger, founder of IXXAT Automation GmbH and co-partner of IXXAT Holding GmbH will end his operational activities as the Managing Director of…
New CANopen extension for IXXAT's canAnalyser
With the new version 2.7 of the CANopen module, IXXAT offers a revised and considerably extended version of its proven CANopen extension for the canAnalyser.
The…
EtherCAT Master Stack
IXXAT now offers an EtherCAT Master Stack, specially suited for the usage under real time operating systems on embedded platforms. At this, many conventional network…
CARcorder – Data Logger for FlexRay and CAN
IXXAT presents on the Embedded World fair the first version of its new data logger for automotive communication systems
The CARcorder is available as Basic or…
CANobserver - Diagnostic tool for the long-term monitoring of CAN bus systems
The new CANobserver from IXXAT enables the physical and logical long-term monitoring of CAN, CANopen and DeviceNet systems. For this, the device is permanently…
IXXAT presents the Industrial Ethernet Module with integrated Switch
IXXAT's FPGA based Industrial Ethernet Module (IEM) now integrates a high-capacity Switch-IP which enables customers to implement powerful and economic line topologies.
The IEM implements a…
CAN Trouble Shooting - New seminar für developers and service engineers
With its new "CAN network analysis seminar", IXXAT now offers a one-day training specially intended for developers of CAN devices and service engineers.
The seminar…
IXXAT Industrial Ethernet Module now POWERLINK Certified
Conformance of the Industrial Ethernet Module (IEM) as part of the POWERLINK Starterkit now approved.
As one of the first devices, the IXXAT POWERLINK Starterkit Controlled…
Modbus-TCP Slave Protocol Software by IXXAT
IXXAT offers with its new Modbus-TCP Stack a powerful software package allowing the fast and easy development of Modbus-TCP server devices.
The software supports…
SAE J1939 API for Microsoft Windows XP/Vista
With the new SAE J1939 API IXXAT offers the J1939 protocol software with a comfortable programming interface as a DLL for Windows XP/Vista and allows…
Universal Embedded Platform for the Automotive Area
The universal Embedded Platform, which was already successful presented in March on the Embedded World Fair in Nuremberg, can as of now be delivered to…
IXXAT announces IntervalZero RTX Drivers for CAN Boards
IXXAT Automation GmbH, a leading supplier of products and services for the data communication in industrial and mobile systems, has announced the release of an…
CANopen Stack supports SocketCAN drivers for Linux
IXXAT Automation GmbH is pleased to announce that the versatile CANopenRT protocol software now supports the most recent implementation of the SocketCAN drivers for Linux…
IXXAT CAN Driver Supports TenAsys INtime RTOS for Windows
IXXAT Automation announces the port of its CAN driver software to TenAsys INtime RTOS for Windows.
TenAsys Corporation is a leading provider of real-time OS and…
New CANopen API for Microsoft Windows Vista
The CANopen Master API and CANopen Manager API from IXXAT now support also Microsoft Windows Vista.
With Windows Vista Microsoft released a successor to Windows…
Seminars for CAN, CANopen and EtherNet/IP
The seminars offered by IXXAT provide a quick and detailed introduction to current communication technologies.
The seminars are aimed primarily at developers and system designers…
High System Availability with IXXAT's Powerlink Stacks
Powerlink with redundant Managing Nodes according to the specification V 1.1.0 and WDS 302-A
A major safety feature for industrial communication is the continuous system availability,…
FlexRay/CAN Gateway with up to four CAN Interfaces
The FlexRay/CAN Gateway software package enables the user to set up a flexible and configurable gateway for the transmission of FlexRay messages and signals to…
IXXAT CARcorder – Logging of Automotive Bus Systems
IXXAT's CARcorder is an universal, automotive diagnosis and logging system for all vehicle communication busses.
The two processor architecture enables the fanless device to record…
New Industrial Ethernet Module from IXXAT
Support of all important Industrial Ethernet Protocols.
At the upcoming SPS/IPC/DRIVES fair in Nuremberg, IXXAT will present the new Industrial Ethernet Module, which enables customers to…
Go To Page: 1
